Controller / Heater Parts

10amp Cat38 power cord 5 meters long 1.5mm core

15amp Cat38 power cord 5 meters long with a 2.5mm core More →

2" Heater tube split nut. Suitable for Balboa, Gecko and Hydroquip controllers. Nut is in two pieces and slides over the heater tube and... More →

2" (50mm) threaded heater union tail piece. Suits Gecko, Balboa, Hydroquip and many others  

50mm ( 2") 45 degree elbow with pump union. Will suit 50mm Waterway, Aqua-Flo pump unions and some models of LX and other brand... More →

6.5amp 250volt slow blow fuse, used in many brands of controllers. Normaly used to protect blower circuits *No Warranty on fuses (fuses are... More →

Adjustable Thermostate. Used in Classic Heaters. Can also be used in many other types of heaters. Adjustable between 20-45 Degrees.... More →

Thermostat Knob. Suits classic heaters and others. More →

REPLACE WITH STANDAND BALBOA VL-401 TOUCH PAD VL-401 Link Advanced Spas Touch Pad and Overlay, 1 pump and blower   More →

REPLACE WITH STANDAND BALBOA VL-401 TOUCH PAD VL-401 Link Advanced Spas Touch Pad and Overlay, 2 pumps and blower More →

Aeware IN.LINK high current 2 speed 2.4m cable. Suitable for all 2 speed pumps. Has a maximum current rating of 15amps. More →

Aeware IN.LINK high current single speed 2.4m cable. Suitable for single speed pumps. Has a maximum current rating of 15amps. More →

Aeware IN.LINK low current 2.4m cable. Suitable for Blowers, Ozone, Circ Pump, etc. Has a maximum current rating of 5amps.   More →

AMP 2 speed pump cordset 4 core 8ft long, used by Balboa and other...

Blower, Ozone and Circulation pump 1.0mm x 3.0m AMP overmoulded cordset. This cordset is used on Davey/Spa-Quip and SpaNET controllers. Due... More →

Low current AMP splitter cable. Commonly used for circulation pumps and ozone units to piggy back off each other.

Single speed 3m AMP overmoulded pump cordset. This cordset is used on Davey/Spa-Quip and SpaNET controllers. Due to overmoulded plug it is... More →

Two speed 3m AMP overmoulded pump cordset. This cordset is used on Davey/Spa-Quip and SpaNET controllers. Due to overmoulded plug it is... More →

***No Longer Available*** *New control system will have to be re-plumbed and wired in*  Arcadia /Rooster Controller" Green... More →

***No Longer Available*** *New control system will have to be re-plumbed and wired in*  "Arcadia/ Rooster... More →

Arctic Spas 3.6kw Heater Assembly, complete with 5pin JJ plug. New Pressure switch not supplied with heater assembly. More →

Arctic Spas 3.6kw Heater Assembly, complete with 5pin JJ plug. New Pressure switch not supplied with heater assembly   More →

Auto Reset Klixon. Used by Spa-Quip Davey on: Pulsar, 2095, SP400, SP500A, SP500AMK2, SP600, SP601, SP750 SP800, SP1200. Also used on... More →

Balboa / Onga Bathmaster V2 data cable. Cable is only compatible with touchpads for the Version 2 pumps(23740, 23940, 24041).  This... More →

This touchpad is only compatible with the Version 2 pumps(23740, 23940, 24041). Balboa / Onga Bathmaster V2 pump touchpad assy(Peanut).... More →

This touchpad is only compatible with the Version 2 pumps(23740, 23940, 24041). Balboa / Onga Bathmaster V2 pump touchpad assy(Rectangular).... More →

***Limited Stock*** Balboa M7 Hi Limit / Temp Sensor. Includes: Sensor Probe 1/4" x 2" Bulb, Sensor Mount Cap, Bulb O'ring... More →

Balboa 25'(8m) ML Series Touchpad Extension Is suitable if original toupad does not reach to the controller. Can be used on all ML Series... More →

Balboa 3.0KW Titanium Plastic Revolution Heater Assembly. High-tech - high-temperature and corrosion resistant housing material. Dimensions :... More →

Balboa AX40 auxiliary 2 pump overlay.     Button configuration - Jets 1, Jets 2, Blower, Light.   Face dimensions:... More →